LD Systems MEI 100 G2 In-Ear Monitor System (CH65/70)

The LD Systems MEI 100 G2 is a dependable wireless in-ear monitoring system offering clear personal monitoring at an accessible level. Operates in Channels 65/70.

Clear Personal Sound

Delivers a clean, focused monitor mix so performers can hear themselves without excess stage volume.

Easy to Run

Simple controls and reliable wireless make it quick to set up and use at any event.

Key Features

• Channels 65/70 operation
• Wireless stereo in-ear monitoring
• Adjustable limiter
• Bodypack receiver with belt clip
• Compact transmitter

Ideal For

• Solo performers
• Small bands
• Presenters
• Houses of worship

Sennheiser XSW IEM In-Ear Monitor System (CH65/70)

An accessible wireless in-ear monitoring system from the Sennheiser XS Wireless range, bringing clear personal monitoring to performers and presenters. Operates in Channels 65/70.

Simple, Reliable Monitoring

Straightforward setup and dependable wireless make personal monitoring easy for any performer.

Great Sound, Easy Setup

An auto-scan feature finds a clear frequency quickly so you can get on with the show.

Key Features

• Channels 65/70 operation
• Wireless stereo in-ear monitoring
• Easy auto-scan setup
• Built-in limiter for hearing protection
• Compact, rugged design

Ideal For

• Solo performers and presenters
• Small bands
• Houses of worship
• Corporate events

Sennheiser EW300 G3 IEM In-Ear Monitor System (CH38)

A professional wireless in-ear monitoring system from the Sennheiser EW300 G3 range, delivering clear, reliable personal monitoring for performers. Operates in Channel 38.

Professional Monitoring

Deliver each performer a dedicated, high-quality monitor mix for confident, comfortable performances.

Wide, Stable Coverage

A wide tuning bandwidth and enhanced RF performance keep monitoring rock-solid across large stages.

Key Features

• Channel 38 licence-free operation
• Wireless stereo in-ear monitoring
• Adjustable limiter to protect hearing
• Wide switching bandwidth
• Multi-channel operation for full bands

Ideal For

• Bands and musicians
• Vocalists and performers
• Festivals and touring
• Theatre and live events

Sennheiser EW300 G2 IEM In-Ear Monitor System (CH65/70)

A professional wireless in-ear monitoring system from the Sennheiser EW300 G2 range, giving performers clear, personal on-stage sound. Operates in Channels 65/70.

Personal On-Stage Mix

Each performer hears their own clear monitor mix, cutting stage volume and improving performance.

Stereo or Focus Modes

Switchable stereo and focus modes let musicians balance mix detail against signal range to suit the venue.

Key Features

• Channels 65/70 operation
• Wireless stereo in-ear monitoring
• Adjustable limiter to protect hearing
• Rugged transmitter and bodypack receiver
• Multi-channel operation for full bands

Ideal For

• Bands and musicians
• Vocalists and performers
• Theatre and musicals
• Houses of worship

Behringer MicroAMP HA400 Headphone Amplifier

The Behringer MicroAMP HA400 is a compact 4-channel headphone amplifier that distributes one audio source to four sets of headphones with individual level control.

Four Independent Feeds

Split a single mix to four headphone outputs, each with its own volume for personal monitoring.

Tiny and Convenient

A pocket-sized, rugged unit that is quick to deploy for cue and monitoring duties.

Key Features

• 4 independent headphone outputs
• Individual level control per channel
• Compact ultra-portable design
• Clean, low-noise amplification
• Simple plug-and-play operation

Ideal For

• Personal monitoring
• Recording and rehearsal
• Broadcast cue feeds
• Silent-listening setups

120 W MIXER AMPLIFIER

• 160 W power amplifier
• 4 mic-line inputs and 1 AUX IN
• VOX facility and phantom power supply on INPUT 1
• Low and high impedance spekers output

Features

• 120 W power amplifier
• 4 mic-line inputs and 1 AUX IN
• VOX facility and phantom power supply on INPUT 1
• Low and high impedance spekers output
• Dual RCA connectors for INPUT 4 and AUX IN
• Ducking control on AUX IN level
• AUX output on RCA connector
• Common tone controls on front panel
• 24 V dc power supply (batteries)

AM 1125 is a 120W mixer-amplifier with 5 audio inputs. Audio input 1 has phantom power supply and get the priority over the other audio inputs through an external command or automatically thanks to the VOX circuit. Dual RCA connectors can be used to link stereo (unbalanced) sound sources (e.g. CD, MP3 players, tuners, etc.). The amplifier output is available both for low impedance loudspeakers (min. 4 Ohm) or 70/100 V constant voltage lines (for loudspeakers with 70/100 V line transformers). It can also be powered by batteries (24 V dc voltage), in order to ensure its proper operation even when the mains supply is unavailable.

The Eagle PA4120E is a robust 120-watt RMS mixer amplifier, ideal for medium to large public address (PA) systems, events, and venues. It features five input channels: one balanced microphone input with voice-operated priority, two additional unbalanced microphone inputs, and two auxiliary inputs for background music or playback devices. The front panel provides separate bass, treble, and individual volume controls for each input, allowing flexible sound management.

This amplifier supports both 100V line and low-impedance (8Ω) loudspeakers, making it suitable for distributed audio installations or direct speaker connections. It can be powered by standard mains (230V AC) or 24V DC, making it versatile for fixed or mobile setups, including commercial vehicles and marine applications.

Key Features:

• 120W RMS output
• 5 input channels (3 mic, 2 aux)
• Mic 1 with priority/VOX function
• Separate tone and volume controls per channel
• 100V line or 8Ω speaker outputs
• 230V AC or 24V DC power options
• Dimensions: 88 x 430 x 234 mm, Weight: 8kg

Mono 70/100 V Amplifier – 200 Watts

The Extron XTRA™ Series XPA 2001 is a half rack 1U, convection cooled power amplifier delivering 200 watts into a 70 volt or 100 volt line. This professional grade amplifier features a 100 dB signal-to-noise ratio with less than 0.1% THD+N. The XPA 2001 is an Ecofficient Level 3 amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ – Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The XPA 2001 is housed in a half rack width metal enclosure, conserving rack space and weighing only 2.5 lbs (1.1 kg). The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be convection cooled.

Energy Efficient Amplifier with Auto Power-Down

The XPA 2001 amplifier is an Ecofficient Level 3 product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes just 10 watts when idle and less than 1 watt in standby mode.

The XPA 2001 is housed in a compact 1U, half rack width enclosure. This amplifier is UL 2043 plenum rated when used with the optional Flexible Conduit Adapter Kit, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.

The XPA 2001 delivers 200 watts rms for high impedance speaker systems in voice reinforcement and distributed audio applications. The XPA 2001 is available in 70 volt and 100 volt models.

The XPA 2001 accepts balanced and unbalanced input signals and includes recessed, detented level controls located on the rear panel to prevent tampering. These controls allow for adjusting audio system gain structure, or setting individual levels for each zone. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller. Additionally, the XPA 2001 includes multiple protection circuits that momentarily activate when an abnormal condition, such as overheating, is detected. An advanced, automatic clip limiter protects speakers from clipping distortion.

Key Features

• 200 watts rms output power:
  XPA 2001-70V – 1 x 200 watts @ 70 volts
  XPA 2001-100V – 1 x 200 watts @ 100 volts
• Meets Ecofficient Level 3
• Professional grade signal-to-noise and THD+N performance
• Extron Patented CDRS™ – Class D Ripple Suppression
• Convection cooled, fanless operation
• Ultra low inrush current – no need for power sequencing

• Inputs: Balanced or unbalanced stereo or mono on a 3.5 mm, 5-pole captive screw connector
• Speaker Outputs: Screw-lock, 5 mm, 2-pole captive screw connector
• 200 watts rms output power:
  XPA 2001-70V – 1 x 200 watts @ 70 volts
  XPA 2001-100V – 1 x 200 watts @ 100 volts — The XPA 2001 provides ample power output for larger rooms.
• Meets Ecofficient Level 3 — Includes an automatic standby mode that provides industry-leading power conservation, with standard amplifiers consuming as little as one watt and network amplifiers consuming as little as four watts when in standby.
• Professional grade signal-to-noise and THD+N performance — The XPA 2001 delivers professional grade performance with 100 dB signal-to-noise ratio and THD+N of less than 0.1%.
• Extron Patented CDRS™ – Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.
• Convection cooled, fanless operation — The XPA 2001 does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.
• Ultra low inrush current – no need for power sequencing — Allows multiple XTRA Series amplifiers to be powered on simultaneously without overloading power circuits. This eliminates the need for power sequencing.
• Power factor correction – removes harmonic content on AC line — The XPA 2001 features power factor correction technology that smoothes out the high peak currents of the amplifier’s current draw, thus minimizing the presence of high frequency harmonics on the AC power line, and therefore preventing audible artifacts from being transmitted to other audio equipment in the system.
• Rack-mountable 1U, half rack width enclosure — The XPA 2001 reduces rack space requirements for many installations.
• UL 2043 plenum rated when used with optional Flexible Conduit Adapter Kit — The XPA 2001 meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling when used with the optional Flexible Conduit Adapter Kit, part # 70-228-02. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.
• Auto power-down with fast power-up — The XPA 2001 meets Ecofficient Level 3 requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection.
• Rear panel recessed, detented level control — Provides attenuation of input signals for adjusting audio system gain staging. It is located on the rear panel to prevent users from tampering with level adjustments.
• Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.
• Multiple protection circuits — Activate during output shorts, thermal overload, or DC faults to prevent damage to the amplifier and speakers.
• Remote standby port — Enables the XPA 2001 to be remotely powered down when not in use, reducing operating cost.
• Remote volume and mute control port — In basic installations without control systems, this port allows the XPA 2001 to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.
• Input summing — Actively sums incoming left and right channel signals for mono amplification.
• High pass filter — This switch selectable filter rolls off frequencies below 80 Hz to prevent saturation of speaker transformers.
• 5 mm screw-lock captive screw speaker connectors — Enable simple, secure connections with 22 to 12 AWG speaker cables.
• Front and rear-mounted signal and protection indication LEDs — Provide convenient indication of input signal presence and protection circuit activation from both sides of an equipment rack.
• Front panel over-temperature LED — Provides visual indication that the enclosure temperature has exceeded the optimal value, well in advance of the onset of thermal protection circuitry.
• Internal Extron Everlast™ power supply — Provides worldwide power compatibility, with high‑demonstrated reliability and low power consumption for reduced operating cost